Camry 2007

Brake Pads

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the 2 front disc brake cylinder slide pins (upper and lower) from the front disc brake cylinder mounting.
  4.  
  5. Remove brake cylinder.
  6.  
  7. Remove the 2 anti-squeal springs.
  8.  
  9. Remove the 2 brake pads from the front disc brake cylinder mounting.
  10.  

To install:

  1. Install the 2 brake pads with front anti-squeal shims to the front disc brake cylinder mounting.
    NOTE
    When replacing worn pads, the front anti-squeal springs must be replaced at the same time.


    NOTE
    Be sure to install the anti-squeal springs into the front disc brake pad installation holes as far as they will go.

  2.  
  3. Install the 2 front disc brake cylinder slide pins (upper and lower) from the front disc brake cylinder mounting.
  4.  
  5. Install the brake cylinder.
  6.  

 
label.common.footer.alt.autozoneLogo