Camry 2007

Ignition Switch

Print

Removal & Installation



Hybrid

Specific to:

Toyota Camry 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the instrument panel sub-assembly as follows:
    1. Disengage the 3 claws and the 2 clips.
    2.  
    3. Disconnect the connector and remove the instrument panel sub-assembly.
    4.  
    5. Detach the 2 claws and remove the power switch from the finish panel.

      Click image to see an enlarged view

      Fig. Ignition power switch view

    6.  

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

Non-hybrid

Specific to:

Toyota Camry 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the 2 screws and ignition or starter switch assembly from the upper steering column w/ switch bracket assembly.
  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

 
label.common.footer.alt.autozoneLogo