Camry 2007

Bleeding The System

Print

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Check the fluid level.
  4.  
  5. Jack up the front of the vehicle and support it with stands.
  6.  
  7. With the engine stopped, turn the wheel slowly from lock to lock several times.
  8.  
  9. Lower the vehicle.
  10.  
  11. Start the engine.
  12.  
  13. Run the engine at idle for a few minutes.
  14.  
  15. With the engine idling, turn the wheel left or right to the full lock position and keep it there for 2 to 3 seconds, then turn the wheel to the opposite full lock position and keep it there for 2 to 3 seconds.
  16.  
  17. Repeat the above steps several times.
  18.  
  19. Stop the engine.
  20.  
  21. Check for foaming or emulsification. If the system has to be bled twice because of foaming or emulsification, check for fluid leaks in the system.
  22.  
  23. Check the fluid level.
  24.  

 
label.common.footer.alt.autozoneLogo