Camry 2008-2009

Clockspring

Print

Clockspring Centering



Specific to:

Toyota Camry 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Check that the ignition switch is OFF .
  4.  
  5. Check that the battery negative (-) terminal is disconnected.
    CAUTION
    After removing the terminal, wait for at least 90 seconds before starting the operation.

  6.  
  7. Rotate the spiral cable counterclockwise slowly by hand until it feels firm.

    Click image to see an enlarged view

    Fig. Adjusting the spiral cable

  8.  
  9. Rotate the spiral cable clockwise approximately 2.5 turns to align the marks.
    NOTE
    Do not turn the spiral cable by the airbag wire harness.


    NOTE
    The spiral cable will rotate approximately 2.5 turns to both the left and right from the center.



    Click image to see an enlarged view

    Fig. Aligning the spiral cable marks

  10.  

Specific to:

Toyota Camry 2009-2010

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Check that the ignition switch is OFF .
  4.  
  5. Check that the battery negative (-) terminal is disconnected.
    CAUTION
    After removing the terminal, wait for at least 90 seconds before starting the operation.

  6.  
  7. Rotate the spiral cable counterclockwise slowly by hand until it feels firm.

    Click image to see an enlarged view

    Fig. Adjusting the spiral cable

  8.  
  9. Rotate the spiral cable clockwise approximately 2.5 turns to align the marks.
    NOTE
    Do not turn the spiral cable by the airbag wire harness.


    NOTE
    The spiral cable will rotate approximately 2.5 turns to both the left and right from the center.



    Click image to see an enlarged view

    Fig. Aligning the spiral cable marks

  10.  

 
label.common.footer.alt.autozoneLogo