Camry 2008-2009

Brake Lines

Print

Specific to:

Toyota Camry 2007-2008


NOTE
Bleed air from the brake line of the wheel farthest from the master cylinder.

  1. Raise and safely support the vehicle.
  2.  
  3. Connect a vinyl tube to the bleeder plug.
  4.  
  5. Have an assistant depress the brake pedal several times, then loosen the bleeder plug while the pedal is depressed.
  6.  
  7. When fluid stops coming out, tighten the bleeder plug, then release the brake pedal.
  8.  
  9. Repeat steps 3 and 4 until all the air in the fluid has been bled out.
  10.  
  11. Tighten the brake bleeder plug to 73 inch lbs. (8.3 Nm).
  12.  
  13. Repeat the above steps to bleed the air out of the brake line for each wheel.
  14.  

Specific to:

Toyota Camry 2009-2010


NOTE
Bleed air from the brake line of the wheel farthest from the master cylinder.

  1. Raise and safely support the vehicle.
  2.  
  3. Connect a vinyl tube to the bleeder plug.
  4.  
  5. Have an assistant depress the brake pedal several times, then loosen the bleeder plug while the pedal is depressed.
  6.  
  7. When fluid stops coming out, tighten the bleeder plug, then release the brake pedal.
  8.  
  9. Repeat steps 3 and 4 until all the air in the fluid has been bled out.
  10.  
  11. Tighten the brake bleeder plug to 73 inch lbs. (8.3 Nm).
  12.  
  13. Repeat the above steps to bleed the air out of the brake line for each wheel.
  14.  

 
label.common.footer.alt.autozoneLogo