Camry 2008-2009

Removal & Installation

Print

Specific to:

Toyota Camry 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Set the A/C system to -RECIRCULATE- mode.
  4.  
  5. Turn the engine OFF.
  6.  
  7. Remove the glove box:
    1. Remove the screw and slide off the damper.
    2.  
    3. Push in each side of the glove box to disconnect the claws.
    4.  

  8.  
  9. Remove the filter cover while pushing in both ends of the cover.
  10.  
  11. Pull the filter out of the filter outlet.
  12.  

To install:

  1. Installation is the reverse of removal.
    NOTE
    Clean with compressed air or replace the filter. Do not clean with water.


    NOTE
    When installing a new filter, be sure the -UP- marks on the filter and filter case are both pointing up.

  2.  

Specific to:

Toyota Camry 2009-2010

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Set the A/C system to -RECIRCULATE- mode.
  4.  
  5. Turn the engine OFF.
  6.  
  7. Remove the glove box:
    1. Remove the screw and slide off the damper.
    2.  
    3. Push in each side of the glove box to disconnect the claws.
    4.  

  8.  
  9. Remove the filter cover while pushing in both ends of the cover.
  10.  
  11. Pull the filter out of the filter outlet.
  12.  

To install:

  1. Installation is the reverse of removal.
    NOTE
    Clean with compressed air or replace the filter. Do not clean with water.


    NOTE
    When installing a new filter, be sure the -UP- marks on the filter and filter case are both pointing up.

  2.  

 
label.common.footer.alt.autozoneLogo