Camry 2008-2009

Malfunction Indicator Light

Print

Resetting



Specific to:

Toyota Camry 2007-2008

DTCs which are stored in the ECM (included in the hybrid vehicle control ECU) can be displayed on Techstream. The Techstream can display current and pending DTCs.

The same DTCs are not set if the ECM (included in the hybrid vehicle control ECU) does not detect the same malfunction again during a second consecutive driving cycle. However, such malfunctions, detected on only one occasion, are stored as pending DTCs.

  1. Check the DTCs as follows:

    Connect Techstream to the DLC3.
     
    Turn the power switch on (IG).
     
    Turn the tester on.
     
    Enter the following menu items: Powertrain / Engine / Trouble Code.
     
    Check for DTC(s) and freeze frame data, and then write them down.
     
    Check the details of the DTC(s)
     

  2.  
  3. Check the DTCs as follows:

    Connect Techstream to the DLC3.
     
    Turn the power switch on (IG).
     
    Turn the tester on.
     
    Enter the following menu items: Powertrain / Engine / Trouble Code.
     
    Press the YES button.
     

  4.  

Specific to:

Toyota Camry 2009-2010

Clear the DTC codes.

 
label.common.footer.alt.autozoneLogo