Camry 2008-2009

Removal & Installation

Print

2.4L Engine



Specific to:

Toyota Camry 2009-2010

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Drain and recycle the engine coolant.
  6.  
  7. Remove the plastic engine cover.
  8.  
  9. Remove the air cleaner inlet assembly.
  10.  
  11. Remove the air cleaner cap sub-assembly.
  12.  
  13. Remove the air cleaner case sub-assembly.
  14.  
  15. Disconnect the ECT sensor connector.
  16.  
  17. Using Special Tool: 09817-33190, remove the engine coolant temperature sensor and gasket.

    Click image to see an enlarged view

    Fig. Removing the ECT sensor-2.4L Engine

  18.  

To install:

  1. Installation is the reverse of the removal procedure. Torque the engine coolant temperature sensor to 15 ft. lbs. (20 Nm).
  2.  
  3. Add coolant and check for leaks.
  4.  

3.5L Engine



Specific to:

Toyota Camry 2009-2010

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain engine coolant.
  4.  
  5. Remove V-bank cover sub-assembly.
  6.  
  7. Remove the air cleaner inlet assembly.
  8.  
  9. Remove the air cleaner cap sub-assembly.
  10.  
  11. Remove the air cleaner case sub-assembly.
  12.  
  13. Remove No. 1 air cleaner inlet.
  14.  
  15. Remove the engine coolant temperature sensor connector.
  16.  
  17. Using a19 mm deep socket wrench, remove the engine coolant temperature sensor and gasket.

    Click image to see an enlarged view

    Fig. Removing the ECT sensor-3.5L Engine

  18.  

To install:

  1. Installation is the reverse of the removal procedure. Torque the engine coolant temperature sensor to 15 ft. lbs. (20 Nm).
  2.  

 
label.common.footer.alt.autozoneLogo