Camry 2008-2009

Manual Transaxle

Print

Drain & Refill



  1. Drain the manual transaxle oil.
    1. Remove the filler plug and gasket.
    2.  
    3. Remove the drain plug and gasket to drain the manual transaxle oil.
    4.  
    5. Install the drain plug with a new gasket. Tighten to 29 ft. lbs. (39 Nm).

      Click image to see an enlarged view

      Fig. Draining manual transaxle oil

    6.  

  2.  
  3. Add manual transaxle oil.
    1. Add oil until the oil level is within 0.197 inch (5 mm) from the bottom of the transmission filler plug opening.
    2.  
    3. Install the transmission filler plug with a new gasket. Tighten to 29 ft. lbs. (39 Nm).
      NOTE
      When adding transaxle oil, make sure that the vehicle is level.


      NOTE
      An excessively large or small amount of oil may cause problems.


      NOTE
      After adding oil, drive the vehicle and recheck the oil level.



      Click image to see an enlarged view

      Fig. Adding manual transaxle oil

    4.  

  4.  
  5. Inspect for oil leaks.
  6.  

 
label.common.footer.alt.autozoneLogo