Camry 2008-2009

Testing

Print

Specific to:

Toyota Camry 2009-2010

  1. Inspect the fuel sender gauge assembly.
    1. Remove the fuel sender gauge assembly.
    2.  
    3. Check that the float moves smoothly between F and E.
    4.  
    5. Measure the resistance between terminals 2 (S) and 3 (FE) of the connector according to the value(s) in the table below. Standard resistance:
      NOTE
      If the value is not as specified, replace the fuel sender gauge assembly.



      Float level F: 13.5 to 16.5 OHMS
       
      Float level between E and F: 13.5 to 414.5 OHMS (gradually changes)
       
      Float level between E: 405.5 to 414.5 OHMS
       



      Click image to see an enlarged view

      Fig. Inspecting the fuel sender gauge

    6.  

  2.  

 
label.common.footer.alt.autozoneLogo