Camry 2008-2009

Removal & Installation

Print

Hybrid Models



  1. Separate the brake master cylinder reservoir sub assembly.
  2.  
  3. Remove the front wiper arm and blade assemblies.
  4.  
  5. Remove the front fender cowl side seals.
  6.  
  7. Remove the cowl top ventilator louver sub assembly.
  8.  
  9. Remove the windshield wiper motor and link assembly.
  10.  
  11. Remove the cowl top panel outer sub assembly.
  12.  
  13. Remove the heater water outlet hose.
    1. Using pliers, grip the claws of the clip and slide the clip to disconnect the heater water outlet hose.

      Click image to see an enlarged view

      Fig. Removing the heater water outlet hose

    2.  

  14.  
  15. Remove the heater water inlet hose.
    NOTE
    Disconnection procedure for the heater water inlet hose is the same as that for the heater water outlet hose.

  16.  
  17. Remove the heater water pump.
    1. Disconnect the connector.
    2.  
    3. Remove the 2 nuts and heater water pump.

      Click image to see an enlarged view

      Fig. Removing the heater water pump

    4.  

  18.  

To install:

  1. Install heater water pump.
    1. Install the heater water pump with the 2 nuts. Tighten to 87 inch lbs. (9.8 Nm).
    2.  
    3. Connect the connector.
    4.  

  2.  
  3. Install the heater water inlet hose.
    1. Install the water hose and attach the clip.
    2.  

  4.  
  5. Install the heater water outlet hose.
    1. Install the water hose and attach the clip.
    2.  

  6.  
  7. Install the cowl top panel outer sub assembly.
  8.  
  9. Install the windshield wiper motor and link assembly.
  10.  
  11. Install the cowl top ventilator louver sub assembly.
  12.  
  13. Install the front fender to cowl side seals.
  14.  
  15. Install the front wiper arm and blade assembly.
  16.  
  17. Install the brake master cylinder reservoir sub assembly.
  18.  

 
label.common.footer.alt.autozoneLogo