Camry 2008-2009

Adjustments

Print

Cables



Specific to:

Toyota Camry 2007-2008

  1. Inspect the parking brake pedal travel, as follows:
    1. Fully depress the parking brake pedal and release it to engage the parking brake.
    2.  
    3. Depress the pedal to the floor again, and release it to disengage the parking brake.
    4.  
    5. Slowly depress the parking brake pedal to the floor, and count the number of clicks. Parking brake pedal travel: 9 to 11 notches at 67.5 lbs. (300 N).
    6.  

  2.  
  3. Adjust the parking brake pedal travel, as follows:
    1. Depress the parking brake pedal. Hold the wire adjusting nut No. 1 using a wrench and loosen the lock nut.
    2.  
    3. Release the parking brake pedal.
    4.  
    5. Turn the No. 1 wire adjusting nut until the parking brake pedal travel meets the above specification.
    6.  
    7. Hold the No. 1 wire adjusting nut using a wrench or equivalent tool and tighten the lock nut to 48 inch lbs. (5.4 Nm).
    8.  
    9. Count the number of clicks after depressing and releasing the parking brake pedal 3 or 4 times. Parking brake pedal travel: 9 to 11 notches at 67.5 lbs. (300 N).
    10.  
    11. Check whether the parking brake drags or not.
    12.  
    13. When operating the parking brake pedal, check that the parking brake indicator light comes on.
    14.  

  4.  

Parking Brake Lever Travel Adjustment (M/T)



Specific to:

Toyota Camry 2007-2008

  1. Pull up the parking brake lever. Hold the No. 1 wire adjusting nut using a wrench and loosen the lock nut.
  2.  
  3. Release the parking brake lever.
  4.  
  5. Turn the No. 1 wire adjusting nut until the parking brake lever travel meets the above specification.
  6.  
  7. Hold the No. 1 wire adjusting nut using a wrench or an equivalent tool and tighten the lock nut to 44 inch lbs. (5 Nm).
  8.  
  9. Count the number of clicks after depressing and releasing the parking brake lever 3 or 4 times.
  10.  
  11. Check whether the parking brake drags.
  12.  
  13. When operating the parking brake lever, check that the parking brake indicator light comes on.
  14.  

Parking Brake Pedal Travel Adjustment (A/T)



Specific to:

Toyota Camry 2007-2008

  1. Depress the parking brake pedal. Hold the No. 1 wire adjusting nut using a wrench and loosen the lock nut.
  2.  
  3. Release the parking brake pedal.
  4.  
  5. Turn the No. 1 wire adjusting nut until the parking brake pedal travel meets the above specification.
  6.  
  7. Hold the No. 1 wire adjusting nut using a wrench or an equivalent tool and tighten the lock nut to 48 inch lbs. (5.4 Nm).
  8.  
  9. Count the number of clicks after depressing and releasing the parking brake pedal 3 or 4 times.
  10.  
  11. Check whether the parking brake drags.
  12.  
  13. When operating the parking brake pedal, check that the parking brake indicator light comes on.
  14.  

 
label.common.footer.alt.autozoneLogo