Camry 2008-2009

Parking Brake Cables

Print

Adjustment



  1. Inspect the parking brake pedal travel, as follows:
    1. Fully depress the parking brake pedal and release it to engage the parking brake.
    2.  
    3. Depress the pedal to the floor again, and release it to disengage the parking brake.
    4.  
    5. Slowly depress the parking brake pedal to the floor, and count the number of clicks. Parking brake pedal travel: 9 to 11 notches at 67.5 lbs. (300 N).
    6.  

  2.  
  3. Adjust the parking brake pedal travel, as follows:
    1. Depress the parking brake pedal. Hold the wire adjusting nut No. 1 using a wrench and loosen the lock nut.
    2.  
    3. Release the parking brake pedal.
    4.  
    5. Turn the No. 1 wire adjusting nut until the parking brake pedal travel meets the above specification.
    6.  
    7. Hold the No. 1 wire adjusting nut using a wrench or equivalent tool and tighten the lock nut to 48 inch lbs. (5.4 Nm).
    8.  
    9. Count the number of clicks after depressing and releasing the parking brake pedal 3 or 4 times. Parking brake pedal travel: 9 to 11 notches at 67.5 lbs. (300 N).
    10.  
    11. Check whether the parking brake drags or not.
    12.  
    13. When operating the parking brake pedal, check that the parking brake indicator light comes on.
    14.  

  4.  

 
label.common.footer.alt.autozoneLogo