Camry 2008-2009

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove rear wheels.
  4.  
  5. For 2.4L and 2.5L engines, remove center exhaust pipe assembly.
  6.  
  7. For 3.5L engines, remove tail exhaust pipe assembly.
  8.  
  9. For 3.5L engines, center exhaust pipe assembly.
  10.  
  11. Remove rear stabilizer link assembly.
  12.  
  13. Remove the 2 bolts and rear stabilizer bar No. 2 bracket.

    Click image to see an enlarged view

    Fig. Removing the 2 bolts and No. 2 bracket

  14.  
  15. Remove the 2 bolts and rear stabilizer bar No. 1 bracket.

    Click image to see an enlarged view

    Fig. Removing the 2 bolts and No. 1 bracket

  16.  
  17. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.
  18.  
  19. Remove rear stabilizer bar.
  20.  

To install:

  1. Install the 2 rear stabilizer bushings to the outside of the stopper ring on the stabilizer bar.
  2.  
  3. Install the rear stabilizer bar No. 2 and No. 1 bracket.
  4.  
  5. Install the rear stabilizer bar with the 2 bolts and tighten to 23 ft. lbs. (31 Nm).
  6.  
  7. Install rear stabilizer link assembly.
  8.  
  9. To complete installation, reverse remaining removal.
  10.  
  11. Check abs speed sensor signal.
  12.  
  13. Inspect and adjust rear wheel alignment.
  14.  

Hybrid

Specific to:

Toyota Camry 2007-2008

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the rear wheels.
  4.  
  5. Remove the center exhaust pipe assembly.
  6.  
  7. Remove the rear stabilizer link assembly.
  8.  
  9. Remove the 2 bolts and rear stabilizer bar No. 2 bracket.

    Click image to see an enlarged view

    Fig. Removing the 2 bolts and No. 2 bracket

  10.  
  11. Remove the 2 bolts and rear stabilizer bar No. 1 bracket.

    Click image to see an enlarged view

    Fig. Removing the 2 bolts and No. 1 bracket

  12.  
  13. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.
  14.  
  15. Remove the rear stabilizer bar.
  16.  

To install:

  1. Install the 2 rear stabilizer bushings to the outside of the stopper ring on the stabilizer bar.
  2.  
  3. Install the rear stabilizer bar No. 2 and No. 1 bracket.
  4.  
  5. Install the rear stabilizer bar with the 2 bolts and tighten to 23 ft. lbs. (31 Nm).
  6.  
  7. Install rear stabilizer link assembly.
  8.  
  9. To complete installation, reverse remaining removal.
  10.  
  11. Check abs speed sensor signal.
  12.  
  13. Inspect and adjust rear wheel alignment.
  14.  

Non-hybrid

Specific to:

Toyota Camry 2007-2008

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove rear wheels.
  4.  
  5. For 2.4L engines, remove center exhaust pipe assembly.
  6.  
  7. For 3.5L engines, remove tail exhaust pipe assembly.
  8.  
  9. For 3.5L engines, center exhaust pipe assembly.
  10.  
  11. Remove rear stabilizer link assembly.
  12.  
  13. Remove the 2 bolts and rear stabilizer bar No. 2 bracket.

    Click image to see an enlarged view

    Fig. Removing the 2 bolts and No. 2 bracket

  14.  
  15. Remove the 2 bolts and rear stabilizer bar No. 1 bracket.

    Click image to see an enlarged view

    Fig. Removing the 2 bolts and No. 1 bracket

  16.  
  17. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.
  18.  
  19. Remove rear stabilizer bar.
  20.  

To install:

  1. Install the 2 rear stabilizer bushings to the outside of the stopper ring on the stabilizer bar.
  2.  
  3. Install the rear stabilizer bar No. 2 and No. 1 bracket.
  4.  
  5. Install the rear stabilizer bar with the 2 bolts and tighten to 23 ft. lbs. (31 Nm).
  6.  
  7. Install rear stabilizer link assembly.
  8.  
  9. To complete installation, reverse remaining removal.
  10.  
  11. Check abs speed sensor signal.
  12.  
  13. Inspect and adjust rear wheel alignment.
  14.  

 
label.common.footer.alt.autozoneLogo