Canyon, Colorado 2004-2005

Removal & Installation

Print

  1. Remove the right hinge pillar trim panel.
  2.  
  3. Remove the blower motor mounting screws.
  4.  
  5. Remove the blower motor cooling tube.
  6.  
  7. Disconnect the blower motor electrical connector.
  8.  
  9. Remove the blower motor.
  10.  

To install:

  1. Install the blower motor.
  2.  
  3. Connect the blower motor electrical connector.
  4.  
  5. Install the blower motor cooling tube
  6.  
  7. Install the blower motor mounting screws.
  8.  
  9. Install the right hinge pillar trim panel.
  10.  

  1. Remove the right hinge pillar trim panel.
  2.  
  3. Remove the blower motor mounting screws.
  4.  
  5. Remove the blower motor cooling tube.
  6.  
  7. Disconnect the blower motor electrical connector.
  8.  
  9. Remove the blower motor.
  10.  

To install:

  1. Install the blower motor.
  2.  
  3. Connect the blower motor electrical connector.
  4.  
  5. Install the blower motor cooling tube
  6.  
  7. Install the blower motor mounting screws.
  8.  
  9. Install the right hinge pillar trim panel.
  10.  

 
label.common.footer.alt.autozoneLogo