Canyon, Colorado 2004-2005

Oil Pressure Sensor

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Disconnect the engine wiring harness electrical connector from the oil pressure switch.
  4.  
  5. Remove the oil pressure switch.
  6.  
  7. To install, reverse the removal procedure. Tighten the switch to 15 ft. lbs. (20 Nm).
  8.  

  1. Raise and support the vehicle.
  2.  
  3. Disconnect the engine wiring harness electrical connector from the oil pressure switch.
  4.  
  5. Remove the oil pressure switch.
  6.  
  7. To install, reverse the removal procedure. Tighten the switch to 15 ft. lbs. (20 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo