Canyon, Colorado 2004-2005

Axle Shaft, Bearing & Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the front wheel.
  6.  
  7. Remove the halfshaft.
  8.  
  9. Remove the sway bar link from the lower control arm.
  10.  
  11. Using an inside puller, remove the axle seal and then the axle bearing from the intermediate housing.
  12.  

To install:

  1. Position the new bearing in the housing and use a bearing installer to press it in.
  2.  
  3. Install a new axle seal using a seal installer.
  4.  
  5. Install the halfshaft.
  6.  
  7. Connect the sway bar link to the control arm.
  8.  
  9. Install the wheel and tighten the lug nuts to 103 ft. lbs. (140 Nm).
  10.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the front wheel.
  6.  
  7. Remove the halfshaft.
  8.  
  9. Remove the sway bar link from the lower control arm.
  10.  
  11. Using an inside puller, remove the axle seal and then the axle bearing from the intermediate housing.
  12.  

To install:

  1. Position the new bearing in the housing and use a bearing installer to press it in.
  2.  
  3. Install a new axle seal using a seal installer.
  4.  
  5. Install the halfshaft.
  6.  
  7. Connect the sway bar link to the control arm.
  8.  
  9. Install the wheel and tighten the lug nuts to 103 ft. lbs. (140 Nm).
  10.  

 
label.common.footer.alt.autozoneLogo