Canyon, Colorado 2004-2005

Removal & Installation

Print

  1. Remove the HVAC module assembly.
  2.  
  3. Remove all retaining screws from the HVAC module case halves.
  4.  
  5. Separate the HVAC module case.
  6.  
  7. Remove the screws retaining the recirculation actuator from the HVAC module assembly.
  8.  
  9. Remove the electrical connector from the recirculation actuator.
  10.  
  11. Remove recirculation actuator.
  12.  
  13. Remove the recirculation door from the recirculation assembly.
  14.  

To install:

  1. Install the recirculation door to the recirculation assembly.
  2.  
  3. Install the recirculation actuator.
  4.  
  5. Install the screws to the recirculation actuator.
  6.  
  7. Connect the electrical connector.
  8.  
  9. Assemble the HVAC module case halves.
  10.  
  11. Install the screws to assemble the HVAC module case halves.
  12.  
  13. Install the HVAC module assembly.
  14.  

 
label.common.footer.alt.autozoneLogo