Canyon, Colorado 2004-2005

Windshield Wiper System

Print

Wiper Motor



Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Place the wiper arms in the 1/2 wipe position.
  4.  
  5. Turn the ignition key to the OFF position.
  6.  
  7. Remove the wiper arms.
  8.  
  9. Remove the air inlet grille panel.
  10.  
  11. Remove the wiper transmission .
  12.  
  13. Using the Wiper Linkage Separator J 39232 , separate the transmission link from the wiper motor crank arm ball stud.
  14.  
  15. Remove the fasteners from the wiper motor to the frame assembly.
  16.  
  17. Remove the wiper motor.
  18.  

To install:


NOTE
Lubricate the socket with Multi-Purpose Lubricant, Superlube, GM P/N 12346241 (Canadian P/N 10953474) or equivalent.

  1. To install, reverse removal procedure.
  2.  
  3. Tighten the wiper motor mounting bolts to 81 inch lbs. (9 Nm).
  4.  
  5. Install the transmission drive link socket onto the crank arm ball of the wiper motor using the Wiper Linkage Installer J 39529 .
  6.  

 
label.common.footer.alt.autozoneLogo