Canyon, Colorado 2006-2007

Arming The System

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Attach the yellow four way connector located behind the glove box.
  4.  
  5. Install the Connector Position Assurance (CPA) to the passenger yellow four way connector located behind the glove box.
  6.  
  7. Turn the ignition switch to LOCK , then remove the key.
  8.  
  9. Attach the four way connector at the base of the steering column and the Connector Position Assurance (CPA).
  10.  
  11. Install the steering column filler panel or knee bolster.
  12.  
  13. Install the AIR BAG fuse to the fuse block.
  14.  
  15. Connect the negative battery cable.
  16.  
  17. Staying away from the air bags, turn the ignition switch to RUN and make sure that the AIR BAG warning lamp flashes seven times and then shuts off. If the warning lamp does not shut off, make sure that the wiring is properly connected. If the light remains on, take the vehicle to a reputable repair facility for service.
  18.  

 
label.common.footer.alt.autozoneLogo