Canyon, Colorado 2006-2007

Disarming the System

Print

  1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
  2.  
  3. Turn the ignition switch to LOCK , remove the key, then disconnect the negative battery cable.
  4.  
  5. Remove the SIR fuse from the fuse block.
  6.  
  7. Remove the steering column filler panel or knee bolster.
  8.  
  9. Unplug the Connector Position Assurance (CPA) and yellow four way connector at the base of the steering column.
  10.  
  11. Remove the Connector Position Assurance (CPA) from the passenger yellow four way connector located behind the glove box.
  12.  
  13. Unplug the yellow four way connector located behind the glove box.
  14.  
  15. Connect the negative battery cable.
    NOTE
    With the AIR BAG fuse removed, the battery cable connected and the ignition in the ON position, the AIR BAG warning lamp will be ON. This is normal and does not indicate a system malfunction.

  16.  

 
label.common.footer.alt.autozoneLogo