Canyon, Colorado 2006-2007

Driven Disc & Pressure Plate

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Transmission
     

  4.  
  5. Install a clutch alignment tool or a used transmission input shaft to support the clutch.
  6.  
  7. If the clutch assembly is going to be reused, mark the flywheel, clutch cover and a pressure plate lug for alignment when installing.
  8.  
  9. Remove or disconnect the following:

    Clutch cover bolts and washers
     
    Clutch cover assembly and the clutch plate
     
    Clutch alignment tool
     

  10.  
  11. Clean all parts and inspect for damage.

    Click image to see an enlarged view

    Fig. Exploded view of the clutch disc and related components-Canyon & Colorado



    Click image to see an enlarged view

    Fig. Clutch pressure plate bolt tightening sequence-Canyon & Colorado

  12.  

To install:

  1. Install or connect the following:

    Clutch alignment tool, to support the clutch
     
    Clutch plate/clutch cover assembly to the flywheel. Tighten the bolts in sequence shown to 15 ft. lbs. (20 Nm).
     

  2.  
  3. Remove the clutch alignment tool.
  4.  
  5. Install or connect the following:

    Transmission
     
    Negative battery cable
     

  6.  

 
label.common.footer.alt.autozoneLogo