Canyon, Colorado 2006-2007

Accelerator Pedal Position Sensor

Print

Removal & Installation





Click image to see an enlarged view

Fig. Removing accelerator pedal position sensor and components

  1. Disconnect the Accelerator Pedal Position (APP) sensor electrical connector.
  2.  
  3. Remove the APP sensor nuts.
  4.  
  5. Remove the APP sensor from the vehicle.
  6.  
  7. To install, reverse removal procedure. Inspect below the pedal for binding, to ensure full range of motion.
  8.  

 
label.common.footer.alt.autozoneLogo