Canyon, Colorado 2006-2007

Manifold Absolute Pressure Sensor

Print

Removal & Installation





Click image to see an enlarged view

Fig. Removing MAP sensor

  1. Disconnect the MAP sensor electrical connector (3).
  2.  
  3. Press the retainer locking tabs inward, then pull the retainer (1) up to remove.
  4.  
  5. Remove the MAP sensor (2) from the intake manifold (3).
  6.  
  7. Inspect the MAP sensor seal for damage and replace as necessary.
  8.  
  9. To install, reverse removal procedure.
  10.  

 
label.common.footer.alt.autozoneLogo