Canyon, Colorado 2006-2007

Rocker Arms & Shafts

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:
    NOTE
    Rocker arms and adjusters, being reused, must be installed in their original positions. Be sure to tag or arrange all rocker arms.



    Camshafts
     
    Rocker arms
     
    Lash adjusters
     

  4.  

To install:

  1. Inspect the rocker arms and lash adjusters for damage or wear and replace as necessary.
  2.  
  3. Fill the lash adjusters with clean engine oil.
  4.  
  5. Install or connect the following:

    Lash adjusters in their original locations
     
    Rocker arms after lubricating them
     
    Camshafts
     

  6.  
  7. Start and run the engine to check for leaks.
  8.  

 
label.common.footer.alt.autozoneLogo