Canyon, Colorado 2006-2007

Sunroof

Print

Power Sunroof



Diagnosis & Testing

The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located. Inspect for aftermarket devices which could affect the operation of the system. Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. Faulty electrical connections or wiring may be the cause of intermittent conditions.

Removal & Installation
Motor

NOTE
When installing the motor spline into the gear, Do not twist the sunroof motor from side to side as it is aligned. If twisted, this may cause the cables to misalignment and the window panel will not close evenly on both side. Verify operations of the sunroof window

  1. Open the sunshade to the full open position.
  2.  
  3. Remove the sunroof front trim cover.
  4.  
  5. Disconnect to electrical connector.
  6.  
  7. Rock the motor back and forth to release it from the cables.
  8.  
  9. To install, reverse removal procedure.
  10.  

Switch
  1. Open the sunshade to the full open position.
  2.  
  3. Using a suitable tool, work the sunroof switch loose from the sunroof front trim cover.
  4.  
  5. Disconnect the electrical connector.
  6.  
  7. To install, reverse removal procedure.
  8.  

 
label.common.footer.alt.autozoneLogo