Canyon, Colorado 2006-2007

Ignition Switch

Print

Removal & Installation



  1. Disable the air bag system, as outlined in the Chassis Electrical Section.
  2.  
  3. Remove the lock cylinder.
  4.  
  5. Remove the switch mounting plate.
  6.  
  7. Remove the shear bolt from the ignition switch and lock housing assembly.
  8.  
  9. Remove the ignition switch and lock housing assembly.
  10.  

To install:

  1. Install the ignition switch and lock housing assembly.
  2.  
  3. Install the shear bolt  into the ignition switch and lock housing assembly.
  4.  
  5. Install the switch mounting plate.
  6.  
  7. Install the lock cylinder.
  8.  
  9. Enable the air bag system, as outlined in the Chassis Electrical Section.
  10.  

 
label.common.footer.alt.autozoneLogo