Canyon, Colorado 2006-2007

Brake Drums

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Wheel and tire assembly
     
    Retaining clip
     
    Brake drum. If the drum will not pull of the axle, use a rubber mallet and tap it around the edge.
     

  4.  

To install:

  1. Install or connect the following:

    Drum on the axle
     
    Retaining clip
     
    Wheel and tire assembly
     

  2.  
  3. Refill the master cylinder and pump pedal to attain full brake pedal before road-testing the vehicle.
  4.  

 
label.common.footer.alt.autozoneLogo