Caravan, Grand Voyager, Town and Country, Voyager, 2000-2004

Rear Main Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Transaxle
     
    Flexplate
     
    Rear main seal

    Click image to see an enlarged view

    Fig. Install the rear main seal flush with the cylinder block surface

     

  4.  

To install:

  1. Place seal guide tool 6926-1 on the crankshaft and place the seal over the tool. Make sure the lip of the seal is facing towards the crankcase.
  2.  
  3. Install or connect the following:

    Rear main seal flush with the cylinder block surface using the tools illustrated.
     
    Flexplate
     
    Transaxle
     
    Negative battery cable
     

  4.  
  5. Run the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo