Removal & Installation
3.3L And 3.8L Engines
- Before servicing the vehicle, refer to the Precautions Section.
Remove or disconnect the following:
NOTEKeep all valvetrain components in order for assembly.
Negative battery cable
Do not rotate the crankshaft during or immediately after rocker arm installation. Wait 20 minutes for the hydraulic lash adjusters to bleed down.
Install or connect the following:
Rocker arm and shaft assemblies. Tighten the bolts to several passes to 200 inch lbs. (23 Nm).
Start the engine and check for proper operation.