Caravan, Grand Voyager, Town and Country, Voyager, 2000-2004

Wheel Bearings

Print

Adjustment



The front and rear wheel bearings are designed for the life of the vehicle and require no type of adjustment or periodic maintenance. The bearing is a sealed unit with the wheel hub and can only be removed and/or replaced as an assembly.

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Brake caliper and rotor
     
    Hub retaining bolts
     
    Hub and bearing assembly
     

  4.  

To install:

  1. Install or connect the following:

    Hub and bearing assembly. Torque the bolts to 45 ft. lbs. (65 Nm).
     
    Caliper and adapter to the brake rotor and align the assembly to the steering knuckle. Torque the mounting bolts to 125 ft. lbs. (169 Nm).
     
    Hub retaining nut. Tighten the nut to 180 ft. lbs. (244 Nm).
     
    Front wheel
     

  2.  
  3. Check and adjust the front end alignment, if necessary.
  4.  

 
label.common.footer.alt.autozoneLogo