Caravan, Grand Voyager, Town and Country, Voyager, 2000-2004

Transfer Case/Power Transfer Unit


Power Transfer Unit

Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  3. Remove or disconnect the following:

    Right front wheel
    Right axle halfshaft
    Propeller shaft
    Cradle plate
    Power transfer unit brackets
    Power transfer unit

    Click image to see an enlarged view

    Fig. Power transfer unit and related components



To install:

  1. Install or connect the following:

    Power transfer unit and brackets. Tighten the bolts to 37 ft. lbs. (50 Nm).
    Rear driveshaft
    Cradle plate. Tighten the bolts to 123 ft. lbs. (166 Nm).
    Right axle halfshaft
    Right front wheel