Caravan, Town & Country 2006-2007

Removal & Installation

Print


CAUTION
Hot, pressurized coolant can cause injury by scalding. Cooling system must be partially drained before removing the coolant temperature sensor.

  1. Drain the cooling system below thermostat level.
  2.  
  3. Unplug coolant temperature sensor electrical connector.
  4.  
  5. Remove coolant temperature sensor.
  6.  
  7. Installation is the reverse of removal. Tighten the sensor to 60 inch lbs. (7 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo