Caravan, Town & Country 2006-2007

Coil Springs

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the strut assembly from the vehicle.
  4.  
  5. Compress the coil spring and remove the piston rod nut.
  6.  
  7. Remove or disconnect the following:

    Upper strut mount
     
    Pivot bearing
     
    Spring upper seat
     
    Coil spring
     
    Jounce bumper and dust shield
     
    Lower spring isolator
     

  8.  

To install:

  1. Install or connect the following:

    Lower spring isolator
     
    Jounce bumper and dust shield
     
    Coil spring
     
    Spring upper seat
     
    Pivot bearing
     
    Upper strut mount. Torque the piston rod nut to 75 ft. lbs. (100 Nm).
     

  2.  
  3. Remove the spring compressor and install the strut assembly to the vehicle.

    Click image to see an enlarged view

    Fig. Position the coil spring as shown during assembly

  4.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the strut assembly from the vehicle.
  4.  
  5. Compress the coil spring and remove the piston rod nut.
  6.  
  7. Remove or disconnect the following:

    Upper strut mount
     
    Pivot bearing
     
    Spring upper seat
     
    Coil spring
     
    Jounce bumper and dust shield
     
    Lower spring isolator
     

  8.  

To install:

  1. Install or connect the following:

    Lower spring isolator
     
    Jounce bumper and dust shield
     
    Coil spring
     
    Spring upper seat
     
    Pivot bearing
     
    Upper strut mount. Torque the piston rod nut to 75 ft. lbs. (100 Nm).
     

  2.  
  3. Remove the spring compressor and install the strut assembly to the vehicle.

    Click image to see an enlarged view

    Fig. Position the coil spring as shown during assembly

  4.  

 
label.common.footer.alt.autozoneLogo