Catera 2000-2001

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the I/P compartment.
  4.  
  5. Release the recirculation actuator to blower motor housing retainer tabs.
  6.  
  7. Disconnect the vacuum hose from the recirculation actuator.
  8.  
  9. Disconnect the recirculation actuator from the recirculation door linkage.

    Click image to see an enlarged view

    Fig. Recirculation actuator

  10.  

To install:

  1. Install the recirculation actuator to the recirculation door linkage.
  2.  
  3. Connect the vacuum hose to the recirculation actuator.
  4.  
  5. Connect the recirculation actuator to the blower motor housing. Ensure the retaining tabs are fully seated.
  6.  
  7. Install the I/P compartment.
  8.  

 
label.common.footer.alt.autozoneLogo