Catera 2000-2001

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the radio.
  4.  
  5. Remove the ashtray.
  6.  
  7. Remove the HVAC control module screws.

    Click image to see an enlarged view

    Fig. A/C control module screws

  8.  
  9. Disconnect the HVAC control module electrical connectors.
  10.  
  11. Remove the HVAC control module.
  12.  
  13. Remove the HVAC control module from the bracket using the following procedure:
    1. Depress the tabs (1) on the side of the control face to release the HVAC control module from the bracket.
    2.  
    3. Slide the HVAC control module out of the bracket.

      Click image to see an enlarged view

      Fig. Removing A/C control panel from bracket

    4.  

  14.  

To install:

  1. Snap the HVAC control face into the bracket.
  2.  
  3. Install the HVAC control module.
  4.  
  5. Connect the HVAC control module electrical connectors.
  6.  
  7. Install the HVAC control module screws and tighten to 17 inch lbs. (1.9 Nm).
  8.  
  9. Install the ashtray.
  10.  
  11. Install the radio.
  12.  
  13. Program the HVAC control with a scan tool, by selecting the programming procedure from the Air Conditioning Special Functions menu and follow the instructions on the screen.
  14.  

 
label.common.footer.alt.autozoneLogo