Catera 2000-2001

Lower Ball Joints

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Lower control arm
     

  4.  
  5. Using a 0.5 inch (13mm) drill, drill out the 3 rivet heads that attach the ball stud to the lower control arm.
  6.  
  7. Remove the ball stud from the lower control arm.

    Click image to see an enlarged view

    Fig. Drill out the rivets to remove the ball joint from the lower control arm

  8.  

To install:

  1. Install or connect the following:

    Ball stud to the lower control arm
     
    Bolts through the upper side of the lower control arm. Torque the new bolts to 26 ft. lbs. (35 Nm).
     
    Lower control arm
     
    Front wheel
     

  2.  
  3. Check and/or adjust the front end alignment.

    Click image to see an enlarged view

    Fig. The replacement ball joint will be bolted to the lower control arm with the bolts supplied in the kit

  4.  

 
label.common.footer.alt.autozoneLogo