Catera 2000-2001

Removal & Installation

Imprimir

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Loosen the fuel filler cap to relieve pressure in the tank.
  4.  
  5. Relieve the fuel system pressure.
  6.  
  7. Remove or disconnect the following:

    Fuel feed and return lines
     
    Fuel filter from the bracket
     

  8.  

To install:

  1. Clean the bolts and fittings on both fuel lines.
  2.  
  3. Install or connect the following:

    Filter in the retaining strap making certain that the flow is in the proper direction
     
    Both fuel lines. Torque the fittings to 18 ft. lbs. (25 Nm).
     
    Fuel filter bracket mounting bolt. Torque the bolt to 13 ft. lbs. (18 Nm).
     
    Fuel filler cap
     

  4.  
  5. Crank the engine for a few seconds and check for leakage.
  6.  

 
label.common.footer.alt.autozoneLogo