Catera 2000-2001

Turn Signal Switch

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disable the SIR system, as outlined in the Chassis Electrical Section.
  4.  
  5. Remove the screw caps from upper steering column.
  6.  
  7. Remove the screws from upper steering column.
  8.  
  9. Remove the upper steering column cover.

    Click image to see an enlarged view

    Fig. Upper steering column cover

  10.  
  11. Remove the steering wheel tilt lever.
  12.  
  13. Remove the rubber protective cover from lock cylinder.
  14.  
  15. Remove the screws from lower steering column cover.
  16.  
  17. Remove the lower steering column cover.

    Click image to see an enlarged view

    Fig. Lower steering column cover

  18.  
  19. Depress the tabs to release turn signal switch from the steering column.

    Click image to see an enlarged view

    Fig. Removing turn signal switch from steering column



    Click image to see an enlarged view

    Fig. Turn signal switch connector

  20.  
  21. Disconnect the turn signal switch electrical connector.
  22.  

To install:

  1. Connect the electrical connector to turn signal switch.
  2.  
  3. Install the turn signal switch to steering column making sure locking tabs engage.
  4.  
  5. Install the lower steering column cover.
  6.  
  7. Install the screws to lower steering column cover.
  8.  
  9. Install the rubber protective cover to lock cylinder.
  10.  
  11. Install the steering wheel tilt lever.
  12.  
  13. Install the upper steering column cover.
  14.  
  15. Install the screws to upper steering column.
  16.  
  17. Install the screw caps to upper steering column.
  18.  
  19. Enable the SIR system.
  20.  

 
label.common.footer.alt.autozoneLogo