Cavalier, Sunfire 2001-2005

Control Module

Print

Removal & Installation



Depending upon vehicle year and application this control module is referred to as the Electronic Control Unit (ECU), Electronic Brake Control Module (EBCM) or Electronic Brake and Traction Control Module (EBTCM).

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the driver-s side kick panel.
  4.  
  5. Detach the control module (EBCM/EBTCM) electrical connectors.
  6.  
  7. Remove the screws attaching the EBCM/EBTCM to the bracket.
  8.  
  9. Remove the module from the bracket.

    Click image to see an enlarged view

    Fig. Electronic Brake Control Module (EBCM) mounting

  10.  

To install:

  1. Position the EBCM/EBTCM to the bracket, aligning the screw holes.
  2.  
  3. Fasten the retaining hex head screws attaching the module.
  4.  
  5. Attach the electrical connectors.
  6.  
  7. Install the driver-s side kick panel.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo