Century, Grand Prix, Impala, Intrigue, Lumina, Monte Carlo, Regal 2001-2005

Fluid Level Sensor

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Detach the electrical connection from the fluid level sensor.
  4.  
  5. Remove the fluid level sensor, using needle-nose pliers to compress the switch locking tabs at the inboard side of the master cylinder.

    Click image to see an enlarged view

    Fig. Location of the fluid level sensor

  6.  

To install:

  1. Insert the fluid level sensor unit until the locking tabs snap in place.
  2.  
  3. Attach the sensor electrical connector.
  4.  
  5. Connect the negative battery cable.
  6.  

 
AutoZone Logo