Century, Grand Prix, Impala, Intrigue, Lumina, Monte Carlo, Regal 2001-2005

3.5L V6 VIN H Auto 2

Print

Trouble Code: P0440



EVAP System No Flow During Purge

Possible Causes:



Charcoal canister is loaded with fuel or moisture
 
Fuel filler cap is loose, cross-threaded, damaged or wrong part
 
Fuel tank, fuel filler neck or fuel sending unit 'O' ring is leaking
 
Fuel tank pressure sensor is damaged, disconnected or it failed
 
Fuel tank vapor line(s) is clogged, damaged or disconnected
 
Purge valve vapor line is clogged, damaged, or disconnected
 
Purge or vent solenoid power circuit is open (check the fuse)
 
PCM has failed
 

Trouble Code: P0442



EVAP System Small Leak (0.040") Detected

Possible Causes:



Charcoal canister is loaded with fuel or moisture
 
Fuel filler cap is loose, cross-threaded, damaged or wrong part
 
Fuel tank, fuel filler neck or fuel sending unit 'O' ring is leaking
 
Fuel tank pressure sensor is damaged, disconnected or it failed
 
Fuel tank vapor line(s) is clogged, damaged or disconnected
 
Purge valve vapor line is clogged, damaged, or disconnected
 
Purge solenoid or Vent solenoid has a small leaking (sticking)
 
PCM has failed
 

Trouble Code: P0443



EVAP Purge Solenoid Control Circuit Malfunction

Possible Causes:



Purge solenoid control circuit is open or shorted to ground
 
Purge solenoid control circuit is shorted to system power (B+)
 
Purge solenoid power circuit is open (test the IGN1 fuse)
 
Purge solenoid is damaged or has failed
 
PCM has failed
 

Trouble Code: P0446



EVAP Canister Purge Vent Blocked

Possible Causes:



EVAP vent fresh air hose is clogged, kinked or restricted
 
EVAP Vent solenoid is contaminated, damaged or has failed
 
FTP sensor is out-of-calibration, damaged or "skewed"
 
PCM has failed
 

Trouble Code: P0449



EVAP Vent Solenoid Control Circuit Malfunction

Possible Causes:



Vent solenoid control circuit is open or shorted to ground
 
Vent solenoid control circuit is shorted to system power (B+)
 
Vent solenoid power circuit is open (test the VENT SOL fuse)
 
Vent solenoid is damaged or has failed
 
PCM has failed
 

Trouble Code: P0452



Fuel Tank Pressure Sensor Circuit Low Input

Possible Causes:



FTP sensor signal circuit is open or shorted to ground
 
FTP sensor VREF circuit is open or shorted to ground
 
FTP sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0453



Fuel Tank Pressure Sensor Circuit High Input

Possible Causes:



FTP sensor signal circuit is shorted to VREF or system power
 
FTP sensor ground circuit is open between sensor and PCM
 
FTP sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0502



VSS Circuit Low Input (4T40-E, 4T45-E, 4T65-E)

Possible Causes:



Output shaft rotor is chipped or damaged
 
OSS tip contains debris or metal shavings (an intermittent fault)
 
OSS positive (+) signal circuit is open or shorted to ground
 
OSS negative (-) signal circuit is open or shorted to ground
 
OSS is damaged or has failed
 

Trouble Code: P0503



VSS Circuit Malfunction (4T40-E, 4T45-E, 4T65-E, 4L80-E)

Possible Causes:



OSS assembly connector is damaged, loose or shorted
 
Output shaft rotor is chipped or damaged (intermittent fault)
 
OSS tip contains debris or metal shavings (an intermittent fault)
 
OSS (+) signal circuit is open or shorted to ground (intermittent)
 
OSS (-) signal circuit is open or shorted to ground (intermittent)
 
OSS is damaged or has failed (an intermittent fault)
 

Trouble Code: P0506



Idle Speed Too Low

Possible Causes:



Air inlet duct is collapsed, loose or air filter element is clogged
 
Base engine problem (i.e., compression or misfire condition)
 
Idle air inlet passage or throttle bore is dirty or full of deposits
 
IAC solenoid control circuit has a high resistance condition
 
IAC valve is damaged or has failed
 
MAF sensor is dirty, out-of-calibration or it is "skewed"
 
Throttle plate, throttle shaft or linkage is damaged or sticking
 
PCM has failed
 

Trouble Code: P0507



Idle Speed Too High

Possible Causes:



Engine vacuum leaks, PCM valve is leaking or the wrong valve
 
Idle air inlet passage or throttle bore is dirty or full of deposits
 
IAC valve is damaged or has failed
 
MAF sensor is dirty, "skewed" or installed improperly
 
Throttle plate, throttle shaft or linkage is damaged or sticking
 
PCM has failed
 

Trouble Code: P0530



A/C Refrigerant Pressure Sensor Circuit Malfunction

Possible Causes:



ACP sensor signal circuit is open or shorted to ground
 
ACP sensor signal circuit is shorted to VREF or system power
 
ACP sensor ground circuit is open
 
ACP sensor is damaged or has failed
 
PCM has failed
 
TSB 61-65-61 contains a repair procedure for this code
 

Trouble Code: P0560



System Voltage Malfunction

Possible Causes:



Check for high resistance at the battery connections or at the Underhood Fuse Block power circuit connection to the PCM
 
Check the drive belt for excessive wear and the proper tension
 
Check the condition of the battery and the Generator output
 
Vehicle may have been used to jump-start another vehicle
 

Trouble Code: P0601



Control Module ROM Malfunction

Possible Causes:



The PCM must be replaced to correct this problem. A new PCM must be programmed with the correct software/calibration.
 
TSB 67-65-23 contains a repair procedure for this code
 

Trouble Code: P0602



Control Module Not Programmed

Possible Causes:



Reprogram the PCM with the correct software and calibration. If this step does not correct the problem, the PCM must be replaced and programmed with the correct software/calibration.
 

Trouble Code: P0603



Control Module Long Term Memory Reset

Possible Causes:



An interruption to the PCM main power and/or ground circuits
 
Check the PCM power and ground circuits and make repairs as necessary. Clear the codes and recheck. If it resets, the PCM must be replaced and programmed with the correct software.
 

Trouble Code: P0604



Control Module Random Access Memory Failure

Possible Causes:



The PCM must be replaced to correct this problem. A new PCM must be programmed with the correct software/calibration.
 

Trouble Code: P0606



Control Module Internal Performance

Possible Causes:



The PCM must be replaced to correct this problem. A new PCM must be programmed with the correct software/calibration.
 

Trouble Code: P0607



Control Module Performance

Possible Causes:



The PCM must be replaced to correct this problem. A new PCM must be programmed with the correct software/calibration.
 

Trouble Code: P0620



Generator Signal Range/Performance

Possible Causes:



Generator 'L' terminal circuit is open, shorted to ground or B+
 
Generator 'F' terminal circuit is open, shorted to ground or B+
 
PCM has failed
 

Trouble Code: P0650



Malfunction Indicator Lamp Circuit Malfunction

Possible Causes:



MIL control circuit is open or shorted to ground
 
MIL control circuit is shorted to system power
 
MIL control power circuit is open in the Instrument Cluster
 
MIL (the lamp) is damaged or has failed
 
PCM has failed
 

Trouble Code: P0711



TFT Sensor Signal Range/Performance (4T65-E)

Possible Causes:



ATF fluid level too low or the fluid is contaminated or burnt
 
TFT sensor is contaminated, damaged or "skewed"
 
PCM has failed
 

Trouble Code: P0712



TFT Sensor Circuit Low Input

Possible Causes:



TFT sensor signal circuit is shorted to sensor or chassis ground
 
TFT sensor is damaged or has failed (it may be shorted)
 
PCM has failed
 

Trouble Code: P0713



TFT Sensor Circuit High Input (4T65-E)

Possible Causes:



TFT sensor signal circuit is open between the sensor and PCM
 
TFT sensor signal circuit is shorted to VREF or system power
 
TFT sensor is damaged or has failed (it may be open)
 
PCM has failed
 
TSB 02-07-30-15 contains a repair procedure for this code
 

Trouble Code: P0716



A/T Input Speed Sensor Circuit Malfunction (4T65-E)

Possible Causes:



ISS positive (+) circuit is open, shorted to ground or to power
 
ISS negative (-) circuit is open, shorted to ground or to power
 
ISS is damaged or has failed
 
PCM has failed
 
TSB 02-07-30-022A contains a repair procedure for this code
 

Trouble Code: P0717



A/T Input Speed Sensor Circuit Low Input (4T65-E)

Possible Causes:



ISS positive (+) circuit is open, shorted to ground or to power
 
ISS negative (-) circuit is open, shorted to ground or to power
 
ISS is damaged or has failed
 
PCM has failed
 
TSB 02-07-30-022A contains a repair procedure for this code
 

Trouble Code: P0719



TCC Brake Switch Circuit Low Input (4T60-E, 4T65-E)

Possible Causes:



TCC brake switch circuit is open or shorted to ground
 
TCC brake switch power circuit is open (check ABS PCM fuse)
 
TCC brake switch is out of adjustment or damaged
 
PCM has failed
 

Trouble Code: P0724



TCC Brake Switch Circuit High Input (4T65-E)

Possible Causes:



Check for ABS trouble codes (they can cause this code to set)
 
TCC brake switch circuit is shorted to system power
 
TCC brake switch is out of adjustment or damaged
 
PCM has failed
 

Trouble Code: P0730



Incorrect Gear Ratio (4T65-E)

Possible Causes:



ATF level is too low, or the fluid is burnt or contaminated
 
ISS or OSS signal circuit has an intermittent fault condition
 
Inspect for debris in the transmission pan or internal damaged
 
Possible vehicle overloading, exceeding the trailer towing limit, or towing in overdrive events occurred (discuss with customer)
 
TSB 02-07-30-022A contains a repair procedure for this code
 

Trouble Code: P0741



TCC System Stuck Off - Mechanical (4T65-E)

Possible Causes:



ATF level is too low, or the fluid is burnt or contaminated
 
Inspect transmission lines to radiator for bends or restrictions
 
Oil pressure screen is clogged or debris in the oil pan
 
TCC control valve is stuck "off" due to sediment or binding
 
TCC regulator valve is stuck "off" due to sediment or binding
 
TCC solenoid valve O-ring or turbine shaft seals leaking or cut
 
TSB 00-07-30-007A contains a repair procedure for this code
 

Trouble Code: P0742



Torque Converter Clutch Circuit Stuck On (4T65-E)

Possible Causes:



TCC PWM solenoid valve for the fluid exhaust is restricted
 
TCC regulated apply valve is stuck in the TCC apply position
 
TCC control valve is stuck in the TCC apply position
 
TCC feed limit valve is stuck (i.e., the TCC feed limit pressure, and the TCC release pressure to be low or nonexistent)
 
Pressure regulator valve is stuck
 
TCC fluid circuits leaking or abnormally low/high line pressure
 
TCC release switch circuit is shorted to ground
 
TSB 00-07-30-007A contains a repair procedure for this code
 

Trouble Code: P0748



Pressure Control Solenoid Circuit Malfunction (4T65-E)

Possible Causes:



PC solenoid high side circuit is open, shorted to ground or B+
 
PC solenoid low side circuit is open, shorted to ground or to B+
 
PC solenoid high or low side driver is damaged or has failed
 
TSB 00-07-30-002B contains a repair procedure for this code
 

Trouble Code: P0751



A/T 1-2 Shift Solenoid - No 1st or 4th Gear (4T65-E)

Possible Causes:



ATF is burnt or contaminated
 
Transmission has an internal malfunction.
 
Shift solenoid valve seals are damaged
 
Transmission has failed
 

Trouble Code: P0752



A/T 1-2 Shift Solenoid- No 2nd Or 3rd Gear (4T65-E)

Possible Causes:



ATF is burnt or contaminated
 
Transmission has plugged or restricted fluid circuits
 
Shift solenoid valve seals are leaking or damaged
 
Transmission has failed
 

Trouble Code: P0753



A/T 1-2/3 Shift Solenoid Circuit Malfunction (4T65-E)

Possible Causes:



1-2/3 shift solenoid control circuit is open or shorted to ground
 
1-2/3 shift solenoid control circuit is shorted to system power
 
1-2/3 shift solenoid is damaged or has failed
 
PCM has failed
 
TSB 02-07-30-022A contains a repair procedure for this code
 

Trouble Code: P0756



A/T 2-3 Shift Solenoid- No 2nd Or 3rd Gear (4T65-E)

Possible Causes:



ATF is burnt or contaminated
 
Transmission has plugged or restricted fluid circuits
 
Shift solenoid valve seals are leaking or damaged
 
Transmission has failed
 
TSB 02-07-30-13 contains a repair procedure for this code
 

Trouble Code: P0758



A/T 2-3 Shift Solenoid Circuit Malfunction (4T65-E)

Possible Causes:



2-3 shift solenoid control circuit is open or shorted to ground
 
2-3 shift solenoid control circuit is shorted to system power
 
2-3 shift solenoid power circuit is open (test TRANS SOL fuse)
 
2-3 shift solenoid is damaged or has failed
 
PCM has failed
 
TSB 02-07-30-022A contains a repair procedure for this code
 

Trouble Code: P1106



MAP Sensor Circuit Intermittent High Input

Possible Causes:



MAP sensor signal circuit is shorted to VREF (intermittent fault)
 
MAP sensor ground circuit is open (intermittent fault)
 
MAP sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P1107



MAP Sensor Circuit Intermittent Low Input

Possible Causes:



MAP sensor signal circuit shorted to ground (intermittent fault)
 
MAP sensor VREF circuit is open (intermittent fault)
 
MAP sensor is damaged or has failed (intermittent fault)
 
PCM has failed
 

Trouble Code: P1111



IAT Sensor Circuit Intermittent High Input

Possible Causes:



IAT sensor signal circuit is open (intermittent fault)
 
IAT sensor ground circuit is open (intermittent fault)
 
IAT sensor is damaged (an intermittent "open" condition)
 
PCM has failed
 
TSB 02-06-03-005 contains a repair procedure for this code
 

 
label.common.footer.alt.autozoneLogo