Removal & Installation
Except 3.5L Engines
- Before servicing the vehicle, refer to the precautions in the beginning of this section.
- Remove the crankshaft balancer using an appropriate puller.
- Pry the front crankshaft seal out.
- Coat the new seal with engine oil to ease installation.
Install the front crankshaft seal using seal installer J-35468 on 3.1L and 3.4L engines. On 3.8L engines use tool J 35354. Make sure that the crankshaft front oil seal lip faces the engine.
Make sure the seal is flush with the engine when installed.
Crankshaft balancer and torque the bolt to 76 ft. lbs. (103 Nm)