Cherokee, Grand Cherokee, 1999-2005

Oil Pressure Sensor

Print

Removal & Installation



  1. Disconnect the negative cable from the battery.
  2.  
  3. Raise vehicle on hoist.
  4.  
  5. Remove front splash shield.
  6.  
  7. Disconnect oil pressure sender connector (4).
  8.  
  9. Remove the pressure sender (2).

    Click image to see an enlarged view

    Fig. Oil pressure sending unit

  10.  

To install:

  1. Install oil pressure sender.
  2.  
  3. Connect oil pressure sender wire.
  4.  
  5. Install front splash shield.
  6.  
  7. Lower vehicle.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo