Cherokee, Grand Cherokee, 1999-2005

Removal & Installation

Print


NOTE
The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module . The fuel pump module is located within the fuel tank.

  1. Remove fuel tank.
  2.  
  3. Remove fuel pump module.
  4.  
  5. Remove electrical wire connector at sending unit terminals.
  6.  
  7. Press upward on release tab to remove sending unit from pump module.

    Click image to see an enlarged view

    Fig. The location of the fuel level sending unit for the Cherokee



    Click image to see an enlarged view

    Fig. The location of the fuel level sending unit for the Grand Cherokee

  8.  

To install:

  1. Position sending unit to pump module and snap into place.
  2.  
  3. Connect electrical connector to terminals.
  4.  
  5. Install fuel pump module.
  6.  
  7. Install fuel tank.
  8.  

 
label.common.footer.alt.autozoneLogo