Chevrolet Blazer/Jimmy 1969-1982 Repair Guide

Bumpers

Print

REMOVAL & INSTALLATION



Front


Click image to see an enlarged view

Fig. Fig. 1 Front bumper retainer locations



Click image to see an enlarged view

Fig. Fig. 2 Front bumper guard mounting

  1. Remove the bolts securing the bumper face bar to the left and right bumper brackets.
  2.  
  3. Remove the bolts securing the bumper face bar to the left and right bumper braces and remove the bumper from the vehicle.
  4.  
  5. If necessary, the brackets and braces may be removed from the frame by removing the retaining bolts.
  6.  
  7. For ease of installation use something to support the bumper and tighten all bolts securely.
  8.  

Rear


Click image to see an enlarged view

Fig. Fig. 3 Exploded view of a typical rear bumper mounting



Click image to see an enlarged view

Fig. Fig. 4 Rear step bumper mounting retainer locations

  1. Remove the bolts securing the bumper face bar to the left and right bumper braces. Disconnect the license lamp wiring.
  2.  
  3. Remove the bolts securing the bumper face bar to the left and right bumper brackets and remove the bumper from the vehicle.
  4.  
  5. If necessary, the brackets, braces and rear stone shield may be removed from the frame by removing the retaining bolts.
  6.  
  7. For ease of installation use something to support the bumper and tighten all bolts securely. Connect the license lamp wiring.
  8.  

 
label.common.footer.alt.autozoneLogo