Chevrolet Blazer/Jimmy 1969-1982 Repair Guide

Door Glass and Regulator

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Common door glass and regulator assembly

  1. Lower the door glass completely.
  2.  
  3. Remove the trim panel from the door.
  4.  
  5. Remove the ventilator assembly as previously outlined.
  6.  
  7. Slide the glass forward until the front roller is in line with the notch in the sash channel.
  8.  
  9. Push window forward and tilt the front portion of window up until rear roller is disengaged.
  10.  
  11. Put window assembly in normal position (level) and raise straight up and out.
  12.  
  13. Installation is the reverse of removal.
  14.  

 
label.common.footer.alt.autozoneLogo