Chevrolet Blazer/Jimmy 1969-1982 Repair Guide

Parking Lamp Housing

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 To remove the front side marker light, unscrew the lens retainers ...



Click image to see an enlarged view

Fig. Fig. 2 1. Socket 2. Bulb 3. Lens ... then remove the socket from the lens by turning it 90 degrees counterclockwise



Click image to see an enlarged view

Fig. Fig. 3 1.Socket 2. Bulb To remove this type of bulb, simply pull it from the socket

  1. Remove parking lamp lens screws and remove the lens.
  2.  
  3. Remove lamp housing retaining screws and pull housing forward.
  4.  
  5. Disconnect parking lamp wiring harness from housing by rotating bulb socket counterclockwise.
  6.  
  7. Connect wiring harness to new housing by inserting bulb socket into housing and rotation clockwise.
  8.  
  9. Install bulb if removed during disassembly. Install lens and retaining screws.
  10.  

 
label.common.footer.alt.autozoneLogo