REMOVAL & INSTALLATION
Fig. Fig. 1View of the hood assembly
Fig. Fig. 2Hood support rod location
Fig. Fig. 3Exploded view of the primary hood latch mounting
Fig. Fig. 4Secondary hood latch removal and installation
Fig. Fig. 5Use a felt-tip pen to matchmark the hood hinge position for installation purposes
Fig. Fig. 6With an assistant holding the hood, loosen the hood hinge bolts
Fig. Fig. 7Hood lock adjustment procedure
Fig. Fig. 8Hood bumper locations and removal and installation
Raise the hood and support with the rod.
Disconnect the under hood lamp wire, if so equipped.
Scribe the hinge bolt-to-hood location.
With an assistant, remove the hood-to-hinge bolts and remove the hood.
With an assistant, place the hood in position and install the hood hinge to hood bolts. Line up the scribe marks made during removal. Check hood alignment after tightening.