Chevrolet Chevette/1000 1976-1988 Repair Guide

Rear Bumper

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1Rear bumper assembly mounting-1976-78 vehicles



Click image to see an enlarged view

Fig. Fig. 2Exploded view of the rear bumper assembly-1979-82 vehicles



Click image to see an enlarged view

Fig. Fig. 3Rear bumper mounting-1983-88 vehicles

  1. Support the bumper and remove the four bumper to energy absorber nuts on each side of the bumper.
  2.  
  3. Remove the bumper guards and protective strips, if so equipped.
  4.  
  5. To install, reverse the removal procedure and tighten the energy absorber to bumper nuts to 25 ft. lbs.
  6.  

 
label.common.footer.alt.autozoneLogo